BE12780_001
BE12780_003
BE12780_004
BE12780_005
BE12780_006
BE12780_007
BE12780_002

Oshikiri Rounder Divider

OSHIKIRI 8 POCKET 200-250 GRAM MAX 16,700 PIECES PER HOUR, 10 POCKET 80-100 GRAM 19,000 PIECES PER HOUR ROUNDER & DIVIDER, TO INCLUDE ROUNDER JPEG 02, DIVIDER JPEG 01, ROUNDER DIVIDER CONVEYOR JPEG 05, ROUNDER INFEED JPEG 850, REJECT CONVEYOR JPEG 850, ROUNDER DISCHARGE BELT JPEG 04, ISHIDA CHECK WEIGHER JPEG 021, CONTROL PANELS JPEG 03, ALL MANUALS AVAILABLE, EXCELLENT CONDITION

Read More
BE14208_001
BE14208_002
BE14208_003

FPA DOUGH TROUGH CHOPPER

Dough Trough chopper Live belt Bottom Long Dual Shaft Plow Choppers bin dim: 38″ w x 28″ deep 100″L with trough dump , 4 tote bins Dim: 60″ wide x 36″ x 24″ deep, with control panel
belt has a gouge in it, also dump motor gear box has broken flange , if not going to use dump assembly
will not affect belt drive or chopper drive, replacement drive specs on file

Read More
BE13338_002
BE13338_003
BE13338_004
BE13338_005
BE13338_006
BE13338_007
BE13338_008

COMAS CHEESE CAKE LINE

COMAS CHEESE CAKE DUAL LANE 3 DEPOSIT HEADS
16-24 MIN . (DEPENDANT ON COMPLEXITY) SER# 3701 MFG 12/10/2004 USED APX 1 1/2 YRS
3 VOLUMETRIC DEPOSITORS (DESCRIBED BELOW) FED BY LEVELl ACTIVATED PUMPS.CAN PUMP AND DEPOSIT A WIDE RANGE OF VISCOSITIES (CAKE BATTER AND FUDGE) AND CAN HANDLE A LIMITED AMOUNT OF SOFT SOLIDS IN SUSPENSION SUCH AS STRAWBERRIES.CAN DEPOSIT UP TO 4 LBS OF CHEESE BATTER. HAS SMALLER CYLINDER THAT WILL ALLOW ACCURATE DEPOSITES OF SMALLER WEIGHTS. EACH CAN BE ADAPTED TO ATTACHMENTS TO DEPOSIT A DISC OF VISCOUS MATERIALS
(I.E. TURTLE FUDGE) OR TWO CONCENTRIC RINGS. HAVE ENOUGH PARTS TO ALLOW THE DEPOSIT OF ONE DISC ONE SET OF CONCENTRIC RINGS AT A TIME. GIVEN THE PROPER VISCOSITIES AND DENSITIES THE THREE DEPOSITORS CAN BE USED IN UNISON TO PROVIDE LAYERING.
PLATEN CONVEYOR SEGMENTED METAL BELT WITH HOLES FOR PANS. PLATE SEGMENTS ARE DESIGNED FOR SPECIFIC PAN DIAMETERS. TRANSPORTS PANS. 10″ PANS (2″,3″ AND 4″ DEEP); 8″ PANS (2″) DEEP; 8″ FOIL FUNDRAISER PANS; 9″ FOIL COCO PANS; 12″ FOIL PANS* 6000 PANS TOTAL
COMPONENTS IN THIS LINE TO INCLUDE 1 – 5 DOOR S.S. CONTROL PANEL QTY 12 MITSUBISHI E 500 CONTROLLERS, 1- PAPER CUP DISPENSER,1 – SMALL PRESS DEVICE, 1- OIL SPRAY UNIT, 1 – CRUMS DEPOSITOR,1 – CRUMS SPREADING UNIT, 1 – HYDRAULIC PRESS, 1 – EJECTOR,
3 – DUAL HEAD DEPOSITORS, 1 – SPREADING MOTION UNIT, VIBRATION NUT DEPOSITOR, APX. 6000 PANS, PORTABLE BATTER DEPOSITOR PUMP, HYDRAULIC MAIN DRIVE POWER PACK, LINE IS COMPLETE AND IN EXCELLENT CONDITION ,

Read More
BE13198_001

Tromp Laminator

TROMP LAPPER LAMINATOR OAD: 9 ‘ 9″ L 47.25 ” W 56 ” H , CONVEYOR DIM: 43.5″ W X 81 ” L
THERE IS A INFFED CONVEYOR THAT BOLTS ONTO LAMINATOR WHICH IS 7 ‘ L CONVEYOR CAN BE LENGTHENED OR SHORTEN.

Read More
BE13196_001

BENIER SLIM DIVIDER

BENIER/DAUB SLIM DIVIDER, MODEL: SLIM IM1. ELECTRONIC SPECS: 208V/3PH/60HZ/1.1 KW, WEIGHT RANGE OF 3 TO 49 OZ. CAPACITY UP TO 1100 PER HOUR. THE HOPPER HOLDS 150LBS. OF DOUGH. HOPPER HEIGHT IS 59″.

Read More
BE13187_001
BE13187_002
BE13187_003
BE13187_004
BE13187_005
BE13187_006
BE13187_007
BE13187_008
BE13187_009
BE13187_010

Werner Lehara Oiler

WERNER LEHARA OILER. STAINLESS STEEL CONSTRUCTION. 460 VOLT. CARBON STEEL FRAME. OIL SLINGERS: 1 UPPER AND 2 LOWER.(SPINNING DISK) CHAIN WIDTH: 41″ X 14′ 4″. OIL TANK DIMENSIONS: 38″W X 48″L X 8″ DEEP (NOT REMOVABLE).

Read More