MX14375_001
MX14375_002
MX14375_003
MX14375_004
MX14375_005

Shaffer Roller Bar MDL 10

Used-Shaffer Horizontal Bar Mixer, Model 10, 1000 LB Capacity Dough Mixer. Stainless steel frame and Bowl. 75 /37.5 HP Motor, 1785892 rpm. Tilt bowl with separate drive. Bowl measures Approximately: 53" x 45" x 44". Starter Panel, 460V, 3 Ph, 60 Hz, Dual End Drive Belt Drive System, Stainless Steel Jacket on Bowl Sheet and Ends, Stainless Steel Roller Bar Split Hub Agitator and Main Shaft, Stainless Steel Cover, Liquid Inlets, 140 Degree Hydraulic Bowl Tilt with approximately 5 HP motor.

Read More
MX14317_001
MX14317_002
MX14317_003
MX14317_004
MX14317_005

1600 lbs Peerless Roller Mixers

TWO 1600 LBS ROLLER BAR MIXERS , MDL# RF1600HD , 1600 IBS LAST USED ON BREAD DOUGH 75 HP VFD BOWL DIM : 56 face x 48 h x 38 deep MOTORS 3/60/480 WITH CONTROL PANELS STARTERS AND DISCONNECT STAINLESS STEEL ELECTRICAL PANELS NEMA 4 , GEARBOX SPECS: RPM INPUT 1750 RATIO : 6:19 RPM OUTPUT 286 , SPARE PARTS , BAR BUSHINGS , SPARE DRIVE BELT , 1 SPARE REBUILT MAIN DRIVE MOTOR , SPERE SET OF AGITATOR SEALS , STATIONARY BOWLS DOORS RAISE AND LOWER NO DOUGH TROUGHS, MANUALS YES, MIXER IN PROCESS OF NEW BOWL END PLATES , NEW DOOR SEAL KIT , JACKETS HYDRO TESTED GOOD

Read More
MX14362_001
MX14362_002
MX14362_003
MX14362_004

Shaffer 8SS

SHAFFER SINGLE ARM MIXER 2400 LBS 41.5 CUFT WORKING CAPACITY, HP 37.5/75 , 3/60/575
WITH STARTERS SIZE 4 STARTER FOR MAIN DRIVE SIZE STARTER FOR 1 HYDRAULIC TILIT ,
WITH HDMI TOUCH SCREEN AND PROCESS CABINET
OAD: 90 " L X 90 " W WITH MOTOR / 54 " WIDE WITHOUT MOTOR X 99" H WITHOUT VALVE ADD 7 " FOR VALVE , BOWL DIMENSION 66 " FACE X 54 " DEEP X 40 " WIDE SHIPPING WT 18,000
CONTROLS: STATERS PLC CONTROL CABINET TOUCH SCREEN

Read More
MX14360_001
MX14360_002
MX14360_003
MX14360_004
MX14360_005

Shaffer Mixer 8SS

SHAFFER SINGLE ARM MIXER 2400 LBS 41.5 CUFT WORKING CAPACITY, HP 37.5/75 , 3/60/575
WITH STARTERS SIZE 4 STARTER FOR MAIN DRIVE SIZE STARTER FOR 1 HYDRAULIC TILIT ,
WITH HDMI TOUCH SCREEN AND PROCESS CABINET
OAD: 90 ” L X 90 ” W WITH MOTOR / 54 ” WIDE WITHOUT MOTOR X 99″ H WITHOUT VALVE ADD 7 ” FOR VALVE , BOWL DIMENSION 66 ” FACE X 54 ” DEEP X 40 ” WIDE SHIPPING WT 18,000
CONTROLS: STATERS PLC CONTROL CABINET TOUCH SCREEN

SPECS: FLOW REQUIRMENT 80-100 GALLONS
SUPPLY TEMP 15f
TEMPATURE RISE -5, -6F
DROP ACROSS JACKET 60PSI
COOLING CAPASITY 35-40 GALLONS

NOTES FROMS SHAFFER THAT WERE SENT TO THE CUSTOMER
If the flow rate is 80 GPM:
80*8.35*6*60*.935 = 224,848 btu/hr.
Motor Load is used for the calculation of how much heat the glycol can transfer, not what the mixer will actually produce.”

Read More
MX14228_001
MX14228_002

JH day ribbon blender

Description: Used- J.H. Day Double Spiral Ribbon Blender, Approximately 36 Cubic Feet Working Capacity (40 total). Non-jacketed 304 stainless steel trough 30" wide x 78" long x 35" deep. Approximate 5" diameter shaft, inner 2" wide x 3/16" thick, outer 1-1/4" wide x 5/16" thick, welded to 1-1/4" diameter posts. 6" Center bottom outlet with pneumatic valve. Top stainless steel grate with no cover, outboard roller bearings. Mixer driven by a 15hp, 3/60/230/460 volt, 1760 rpm thru falk gear drive 24.94 to 1 ratio. Mounted on a stainless steel frame. Serial# 2150.
Comments: Prior usage as at a Bakery. Flour and Sugar. OAD 136"L x 36"W x 88"T, 2800#. PHOTOS 8/2017.

Read More
MX14227_001
MX14227_002

American process ribbon blender

Used- American Process Double Spiral Ribbon Blender, Model DRB-24H, 24 Cubic Feet Working Capacity, 304 Stainless Steel. Non-jacketed trough 26″ wide x 66″ long x 30″ deep. Approximate 3″ diameter shaft, inner ribbon 2″ wide x 3/16″ thick, outer 1-1/2″ wide x 3/8″ thick, welded to 5/8″ thick posts. 6″ Diameter center bottom outlet with pneumatic valve. Two piece top cover. Openings top: 12″, (2) 6″. Mixer driven by a 10 hp, 3/60/230/460 volt, 1740 rpm motor thru reducer 37.37 to 1 ratio. Outboard roller bearings. Includes Shick tube-veyor feeding system consisting of (1) hopper approximate 54″ diameter x 12″ straight side x 44″ cone, side lug mounted, (1) hopper approximate 48″ diameter x 30″ straight side x 40″ cone, mounted on (3) legs, (2) shick feeders driven by 3/4 hp motors, (1) dust collector. Serial# 3643B, built 1992.

Read More
MX14226_001
MX14226_002

Peerless SD6

PEERLESS SD 6 SINGLE ARE MIXER , INSIDE BOWL DIM : 45 " F X 50 " D X 46 " W ,
HYDRAULIC TILT SINGLE CYLINDER AND HYDRAULIC PACK , 1600 LBS MIXING CAPACITY
31 CUFT WORKING CAPACITY, MIXER OAD: 46 " W X 106 " L X 96 " H
MOTOR SPECS: 3/60/230/480 30 HP AMPS 76/38 FRAME 286 T MFG HIGH EFFICIENCY
NO JACKET ,NEW PACKING GLANDS
SHIP WT 12,500 LBS

Read More
MX14258_018

Peerless SD9

PEERLESS MIXER SD 9 2800 LBS MIX CAPACITY , WITH JACKETED , JACKET NEVER USED , WITH STAINLESS STEEL SCALE HOPPER WITH WEIGH CELLS , 60/30 HP 3/6/480 MAIN DRIVE MOTOR , SPARE MAIN DRIVE MOTER, ALLEN BRADLEY TOUCH SCREEN MOUNTED ON MIXER , DISCONNECT BOX WITH A/B FLEX 70 MOTOR SPEED CONTROLLER 2 DOOR STAINLESS STEEL CABINET WITH COOLING SYSYTEM FOR FLEX 70 DRIVER, HAS CHARGE VALVES FOUR MICRO MOTION INGREDIENT SUPPLY MONITORS, MIXER IN EXCLLENT CONDITION JACKET NEVER USED, SCALE HOPPER WITH LOAD CELLS AND TOUCH SCREEN SCALE READOUT PANEL , NEW SPARE 60/30 HP MOTOR 2800 LBS MIX CAPACITY SHIP WEIGHT 19,000 LBS ***********************************************
OAD : WITH SCALE HOPPER 179 " H X 102 " L X 6 ‘ W, WITH 32 " OF DRIVE MOTOR PRETRUDING FROM BACK OF MIXER, SPROCKETS BOTH SIDES
EXCELLENT CONDITION

Read More
MX14225_001
MX14225_002

PEERLESS DA250

PEERLESS DOUBLE ARM DA 250 INSIDE BOWL DIM: 48 " face x 44"x42"w,
MOTOR SPECS : 40/20 HP 3/60/480 110 AMP DISCONNECT , 1,700 LBS MIXING CAPACITY , 33.7 CUFT MIXING CAPACITY WITH STARTER AND DISCONNECT PANEL QTY 3 SIZE 3 NIEMA STARTERS 3 HP ELECTRIC TILT SHIP , WT 12,400 LBS. MIXER OAD: 112 " FACE 42 " W X 94 H"

Read More