Fritsch Laminator 3000 dough line
Fritsch Laminator 3000 dough line,One Fritsch Laminator 3000 dough line,Technical Data
Table width 700 mm, 900 mm, 1,100 mm, 1,300, 1,500 mm Belt speed up to 15 m/min Dough capacity
up to 5,000 kg/h (depending on configuration, product type and environment Layers up
to 12 layers per folding unit Advantages: Continuous dough sheet production at the highest quality level
Gentle working method to maintain the dough structure capacity Huge range of applications due to the possibility to process very different types of dough Short retooling times and quick product changeovers
High automation comfort by customized production programs which can be opened as reired
Quick and easy operation Comfortable data backup by USB interface service life due to its robust stainless steel Design Easy to clean due to its hygienic design and good accessibility
Machine Nr. 06P173_001060, Year of production 2007, Type SBL-900-1300, 75A, Made In Germany, last used for baguette production. Line comes with Dough Conveyor Dough Sheet Processor Strewing Unit
Pressing Unit Satellite Head SBL Spiral Cross Roller Calibrating Head SBL Flour Removal Units Roller Drive
Round Belt Table Belt Spreading Unit High-Performance, Combination, High-Performance-Combination-Guillotine Punching Die Nozzle Moistening Unit Coiling and Moulding Unit Alignment Ruler Dough Piece Deposition SMBoard conveyor.
Rondo Baguette Line
Item: One Rondo ASTec.D Baguette Line
Technical Data
• Capacity: 500 – 5000 kg/h
• Weight range: 25 – 4500 g
• Max. water content: higher than 80 %
Advantages:
· Production of pastries with high quality and long shelf life, also without preservatives, is enabled.
· Shorter cleaning and maintenance times, leading to a reduction in costs and longer production time.
· Easy access to all important components.
· No accumulation of product scraps or materials in niches or cavities.
· Computer-based cleaning programs enable maximum hygiene that is reproducible at any time.
Machine: Rondo ASTec.D, Line Reference:SD321502, Year of production 2013, Made In Switzerland, last used for Baguette Production. Line comes with:
· MIDOS dough band former
· conveyor belt
· flour duster
· satellite unit 1R
· conveyor belt
· flour duster
· cross roller
· spiral cross roller
· sheeter
· conveyor belt
· flour duster
· sheeter
· conveyor belt
· upper flour removal brush
· motorized cutting knifes
· 1st conveyor belt 300 for scraps
· spreading belt
· guillotine
· panning machine with scraps ejector
· 2nd conveyor belt 300 for scraps
· conveyor belt
· spreading belt
· conveyor belt for panning
· 1st conveyor belt 500 for scraps
· guillotine for scraps
· 2nd conveyor belt 500 for scraps
Adamatic Kaiser Roll Line
) Adamatic/Glimek Hoist/Bowl/Hopper
1) Adamatic/Glimek Bulk Hopper
1) Adamatic VDR Divider Rounder
1) Adamatic Intermediate Proofer
1) Adamatic Bypass Conveyor
1) Adamatic Stamper Base
1) Adamatic Roll Stamper
1) 6 Row Tilting Infeed To Sheeter
1) Adamatic Sheeter
1) Adamatic Moulding Table
1) Moulding Table Extension
2) Moulding Systems
1) Adamatic Transfer/Timing Conveyor
1) Adamatic Automatic Reciprocating Panning Conveyor
1) Standard Electrical Panel
Adamatic/Glimek Hoist/Bowl/Hopper:
Model: BL241A-048
O.A. Dims: 4′-9″D x 5′-6″W x 13′-6″H
Air Requirements: 3/8″ Air Line @ 80 – 100 PSI
480V 3Ph 60Hz
Adamatic/Glimek Bulk Hopper:
Capacity: 1000 lbs
Air Requirements: 70-100 PSI 3/8″ NPT
Teflon Coating Inside Hopper
Filter/Regulator Included
Safety Guard Between Gate And Divider/Rounder Hopper
Includes Floor Mounted Frame
Stainless Steel Construction
Adamatic VDR Divider Rounder:
4 – 6 Row Operation
Speed: Up To 50 Strokes Per Minute
Adjustable Finger Belt Discharge Conveyor
Straight Belt For Use With By-pass Conveyor
Fully Adjustable Hydraulic Main Piston
Variable Frequency Speed And Rounding Control
Stainless Steel Covers (Electrically Interlocked For Safety)
Digital Stroke Indicator
Central Drive Unit With Electric Clutch
Adjustable Height Flattening Roller
Simple Weight Adjustment
Flour Duster On Rear Belt
1.5 HP Rounding Motor
208/220V 60Hz 3Ph
Adamatic Intermediate Proofer:
Capacity: 8.64 Minute Proof At 10,000 Pieces Per Hour
Tray Capacity: 1 – 10 oz
Heavy Duty Roller Chain
Sliding Plexi Glass Inspection Windows
Stainless Steel Base Covers
High Impact Plastic Trays With Nylon Mesh Inserts
Knock Out Roller
Exhaust Fan/Humidistat Package
Catch Pan Under Proofer Base
Driven By Divider/Rounder
\Adamatic Bypass Conveyor:
Allows Round Rolls To Bypass Proofer To Allow For Steam Control
Adamatic Stamper Base:
Houses Drive Mechanism For Roll Stamper
Adamatic Roll Stamper:
6 Row Infeed Belts With Timing Gate Included
Flour Duster At Machine Entry
Individually Adjustable Discharge Belts
Sychronized With Proofer Discharge
Catch Pan Under Stamper
Driven By Divider Rounder
Tilting Infeed:
6 Across
Timing And Hold Back Gates
Adamatic Sheeter:
Model: SS31
31″ Belt
Pre Flattening Roller With Timing Gate
Two Sets Of Adjustable Non Stick Rollers
High Speed Coiling And Discharge Belt
1 HP Motor
208V 60Hz 3Ph
Adamatic Moulding Table:
Variable Speed Control
Pressure Plate Holding Brackets
Pnuematic Timing Device At Discharge
True Track Automatic Belt Tracking
Spinning Roller At Discharge
Alignment Chain After Plates
Flour Duster Mounted Over Alignment Chain
3 HP Motor
208/220V 60Hz 3Ph
Moulding Table Extension:
24″ Pre-Moulding Pressure Plate Assembly
Allows For Dual Moulding Board System For Extended Product Length
Moulding System 1: (Hot Dog Buns)
Infeed Unit To Sheeter 4 To 4 (May Change For Smaller Weights)
Curling Chain: 4 Across
48″ Harness With All Mounting And Adjusting Hardware
(4) Pressure Boards 6″ Wide
Moulding System 2: (Hoagie Rolls)
Infeed Unit To Sheeter 6 To 3
Curling Chain: 3 Across
48″ Harness With All Mounting And Adjusting Hardware
(3) Pressure Boards 8″ Wide 9-3/8″ ctr
Adamatic Transfer/Timing Conveyor:
Independently Driven
One Timing Gate For Alignment Of Round Rolls And Hamburger Buns
Flattening Roller
Tubular Steel Frame
1.5 HP Motor 208/220V 60Hz 3Ph
Adamatic Automatic Reciprocating Panning Conveyor:
Model: PD-6
31″ Wide Retractable Belt
Variable Speed For Adjustable Spacing (Clustering Not Included)
Maximum Stroke 28″
Air Requirements: 70 To 100 PSI
Photocell Controlled
Hand Panning Shelf
1.5 HP Motor
208/220V 60Hz 3Ph
Standard Electrical Panel
Complete Cracker Line/Spooner Vicars/Baker Perkins/Bosch
COMPLETE CRACKER LINE YR 2006 , SPOONER VICARS SHEETING LINE , BAKER PERKINS 1.2 MTR WIDE
220 ‘ LONG 5 ZONE OVEN , RILEY LANING SYSTEM , 3 BOSCH WRAPPERS, JONES SLUG INDEXER AND JONES CARTONER , CARTON BOXING SYSTEM ,
LINE INCLUDES : DOUGH TROUGH DUMPER , INCLINE CONVEYOR , METAL DETECTOR , THREE ROLL PRE-SHEETER , CUT SHEET LAMINATIOR , 1 ST – 2 ND FINIAL GAUGE ROLLS TOUICH SCREEN CONTROLS DUAL HEAD CUTTING STATION SQUARES OR ROUND , SALTER , SCRAP RECOVERY, OVEN PANNING CONVEYOR, 5 DOOR STAINLESS STEEL CONTROL PANEL, SPOONER VICARS OVEN 1.2 MTR WIDE X 220 LONG WIRE MESH 5 ZONE WITH 2 DOOR STAINLESS STEEL CONTROL PANEL WITH TOUCH SCREEN, GEO OILER, 250 ‘ L COOLING BELT, PACKAGING EQUIPMENT: CRACKER STACKING CONVEYOR TOUCH SCREEN CONTROL , RILEY FEED SYSTEM 5 DOOR CONTROL PANEL WITH TOUCH SCREEN, 3 BOSCH SLUG WRAPPERS WITH INFEEDS TOUCH SCREEN CONTROLS, JONES SLUG INDEXER JONES CARTONER,
ALL CONTROLS ALLEN BRADELY FLEX, SPARE PARTS INCLUDED, WITH MANUALS DIGITAL DATA
Rademaker Sheeting Line
Rademaker Sheeting System, 1000mm Wide, Serial# 7193, Built 2008. Consisting of: (1) 10″ wide x 96″ long rubber belt conveyor with a 0.37kw gear motor, (1) 3 roll inclined belt feeder with screw distribution, belt 42″ wide x 96″ long with (2) 0.37kw gear motors, (1) heavy duty 3 roll extruder, approximate 1000mm wide x 300mm diameter x 100mm shaft diameter rolls, (1) rubber conveyor belt from 3 roll extruder to 2 roll sheeter, (1) 2 roll sheeter, approximate 1020mm wide x 400mm diameter cored rollers, minium gap opening 0.1mm x maximum gap opening 2.8mm, minimum colling temperature 10 degrees C., maximum dough reduction 2:1, (1) driven cutting roller base, 1000mm working width, (1) scrap dough return system, (1) Outfeed oven belt conveyor, (1) Control panel with an Allen-Bradley CPU, PanelView Plus 1000, and PowerFlex 70 drives. Manual & prints available
APV Cracker Sheeting Line, 24″ Wide
APV 24 ” SHEETING LINE, FEED ROLL 10 IN DIA, SECOND & THIRD GAUGE ROLL 8IN DIA, FEED ROLL OAD 4’6 L x 5′ W x 7’2 H, SECOND & THIRD ROLL OAD 4’6″ L X 6’2″ W x 7’2″ H, 3HP MOTORS RPM 1750, SCRAP RETURN 20 IN WIDE x 14 FT LONG, DIE CART WITH SPARE CUTTING DIES 5’6″ L x 3′ W, PRE SHEETER TWO SHEETING HEADS ROTARY CUTTER STATION 5FT L X 4’6W X 4’7H OAD OF CUTTING ROLLS 19IN L X 8INCHES IN DIAMETER USED AS A LAB UNIT VERY LOW HOURS ELECTRICAL REQUIREMENTS 50/60HZ 230V
Imaforni Laminated Sheeting Line
1.2 METER IMAFORNI LAMINATED SHEETING LINE TO CONIST OF: PRE-SHEETER,LAMINATOR, LAMINATOR INCLINE CONVEYOR TO FOUR SHEETING ROLLS 1st GAUGE 2nd GAUGE 3 rd GAUGE ROLL FINIAL GAUGE ROLL, TO DUAL HEAD CUTTING STATION WEBB PICK UP CONVEYOR TO SCRAP RETURN CONVEYOR 6 DOOR CONTROL PANEL EXCELLENT CONDITION A/B CONTROLS
Vicars 1.2 Meter Sheeting Line
VICARS 1.2 METER SHEETING LINE TO INCLUDE:
4 ROLL PRE SHEETER LARGE FEED ROLLS ONE ROLL CORRUGATED ON ROLL SMOOTH TWO LOWER SMOOTH ROLLS , 1 ST GAUGE ROLL & 2 ND GAUGE ROLLS, DUAL HEAD ROTARY CUTTER, NEW BEARINGS, ALL ROLLS RE-SURFACED COMPLETE RE-BUILD 2005 TAKEN OUT OF SERVICE 2007, LAST USED ON ANIMAL CRACKERS, OAD: 1 ST GAUGE ROLL STAND 94 ” WIDTH
X 48 ” DEEP X 62 ” H , 2 ND GAUGE ROLL STAND 94 ” FACE X 52 ” DEEP X 62 ” H
T.L. green 60" sheeting line
"T.L. GREEN 60" SHEETING LINE TO CONSIST OF DUAL PRESHEETER (EXTRUDER) 1 ST GAUGE ROLL, 2 ND GAUGE ROLL, FINAL GAUGE ROLL, DUAL HEAD ROTARY CUTTER, EDDIE CURRENT DRIVES
( SPARE DRIVES ) 2 CONTROL PANELS ROLL DIM: 57.5 " FACE X 12" DIA
Rademaker sheeting line
RADEMAKER SHEETING LINE TO INCLUDE: CHUNKER/3 ROLL EXTRUDER 24 ” W FLOUR DUSTER WITH FLOUR HOPPER, CONVEYOR TOP COMPRESSION ROLL 8 ” X 25.5″ W , DUAL SHEETING ROLL 12″ DIA. X 28″ FACE BOTTOM ROLL TOP ROLL HAS 11 3″ DIA ROLLS CAROUSAL ROLL, FLOUR DUSTER, CROSS SHEETER, DUAL ROLL SHEETER 23″ X 6 ” DIA, ONTO DISCHARGE CONVEYOR